SKF bearings|FAG bearings|INA bearings|TIMKEN bearings|NSK bearings - Eric bearing supplier

In mechanical engineering, there are many types of NSK bearings, but there are only three types of NSK bearings used in radiator products according to their basic working principles: sleeve bearings using sliding friction and ball bearings using rolling friction And the two bearing types mix these three.In recent years, major ra...

Routine inspections of rolling NSK bearing products must be carried out under the conditions specified in the national standards. (1) Temperature conditions during measurement The ambient temperature during measurement is specified as 20C. The temperature of NSK bearings, gauge blocks, standard parts and measuring instruments mu...

Generally speaking, the rolling bearing itself does not generate noise. The commonly felt NTN tapered roller bearing noise is actually the sound effect of the bearing directly or indirectly vibrating with the surrounding structure. This is why many times the noise problem can be regarded as a vibration problem involving the enti...

1. Installation and adjustment of high-speed FAG bearings: The coordination and clearance of high-speed FAG bearings Since high-speed FAG bearings are required to meet the requirements of high-precision FAG bearings and high-temperature FAG bearings, the following two points must be considered when considering their cooperation ...

In recent years, predictive maintenance, a next-generation maintenance method, has been attracting attention in manufacturing circles. Predictive maintenance type condition monitoring of equipment and production lines not only helps with maintenance management, but also will be utilized to detect early signs of abnormality or fa...

About SKF ball bearings and ball bearing units SKF ball bearings and ball bearing units are assembled in units. Before installing, you should not try to disassemble the bushing and remove the mounting ring from the bearing. When installing or removing ball bearings and bearing units, SKF recommends using a sling or dry jack to u...

About the assembly of TIMKEN bearings The assembly of TIMKEN bearings should be determined according to the structure, size and matching nature of the bearing components. Generally, the assembly methods of TIMKEN bearings include hammering method, pressing method, hot mounting method and cold shrinking method. 1. Preparation wor...

The peeling damage of the NSK bearing means that when the bearing rotates under load, the raceway surface or rolling body surface of the inner and outer rings exhibits scaly peeling due to rolling fatigue. The causes of bearing peeling damage are: excessive load on the bearing; poor lubrication of the bearing or selection of ina...

Bearings are an important part of contemporary machinery and equipment. Its main function is to support the mechanical rotating body to reduce the friction coefficient of the mechanical load during the transmission of the equipment. Among them, SKF bearings are one of the common imported bearings. What do we need to pay attentio...