SKF bearings|FAG bearings|INA bearings|TIMKEN bearings|NSK bearings - Eric bearing supplier

1. What is TIMKEN bearing chamfer Chamfering is a term in mechanical engineering. In order to remove the burrs caused by machining on the parts and to facilitate the assembly of the parts, chamfers are generally made at the ends of the parts. The chamfers can be seen everywhere in our lives, on the frame of the mobile phone, on ...

1. Install precision Japanese NSK bearings correctly For the installation of precision Japanese NSK bearing products, some things should be paid attention to after installation. If it is not installed properly, the life of Japanese NSK bearings will not be long. Therefore, if you want to install Japanese NSK bearings, you should...

The correct use of SKF bearings can be used until the fatigue life is reached. However, there may be accidental damage prematurely, and may not be able to withstand use. This early damage, as opposed to fatigue life, limits the use of qualities called failures or accidents. It is mostly caused by careless installation, use, and ...

(1) Scar sound and its control method If the rolling surface of the rolling bearing has cracks, indentations or corrosion, periodic vibration and noise like riveting rivets will occur. The period may be fixed, but most of them have a certain corresponding relationship with the speed. The scars will continue to occur on the chann...

The use conditions of TIMKEN bearings or sensor installation positions are different, so it is necessary to analyze and compare the measured values of each machine in advance to determine the judgment standard, and finally check according to the temperature of the needle roller bearing. The temperature of needle roller bearings ...

Examples of KOYO bearing damage and its causes and countermeasures, please use them as data for inferring the cause of bearing damage. Damage status: When KOYO bearings are subjected to load and rotate, the raceway surface or rolling element surface of the inner ring and outer ring will show scales due to rolling fatigue Like pe...

The clearance between FAG imported bearings and shaft must be appropriate to make the life of FAG imported bearings longer. The following methods can be used to detect the radial clearance of FAG imported bearings: 1. Ruler detection method For imported FAG bearings with larger diameters, the clearance is larger, and it is plann...

1. Install precision Japanese NSK bearings correctly For the installation of precision Japanese NSK bearing products, some things should be paid attention to after installation. If it is not installed properly, the life of Japanese NSK bearings will not be long. Therefore, if you want to install Japanese NSK bearings, you should...

When disassembling the SKF bearing for maintenance, first record the appearance of the SKF bearing, confirm the remaining amount of lubricant, and after sampling the lubricant for inspection, wash the bearing. As a cleaning agent, gasoline and kerosene are commonly used. The cleaning of the removed imported bearings is divided i...