Welcome to Eric Bearing Limited! Quality Bearings at an Honest Price.



Home > News >

Introduction of FAG Cylindrical roller bearings

Source:  skf bearing  Time:  2011-12-06

    Cage with a single row FAG Cylindrical roller bearing is a whole including inside and outside the ring, cylindrical roller and  cage assembly of a set of assembly. On both sides with rigid outer wall or no wall, there are one or two inner a rigid wall, or no design wall. FAG Cylindrical roller cage to prevent rolling when in contact with each other.

    Very rigid cylindrical roller bearings can support high radial loads, and because of the cage, making it suitable for high  speed more than the full complement design. With suffix E, and a larger group of roller bearings, is designed for high load  capacity,this bearing is split, so it easier to install or remove. Therefore, two bearing rings with interference fit.

    A cage of single row cylindrical roller bearings can be used as non-locating bearing, semi-locating bearings and locating bearings. High-precision cylindrical roller bearings double row precision bearings for machine tools. Allow radial bearing stiffness and high precision, mainly for the spindle radial support. Include the whole outer ring without ribs, the whole inner three ribs, cylindrical roller and cage cage brass components. In order to achieve the best radial clearance within the assembly, the inner ring design with a 1:12 taper cone. Cylindrical roller bearings are detachable, so this design makes installation easier removal. Therefore, two bearing rings with interference fit.